Cisco CE500 switch, GUI configuration save

[Clem58]

Hello,

I'm working on old switches Cisco CE500, I know we can configure it with 2 manners, GUI and GUI CLI.

For GUI CLI I've seen the "write" command, and I beleive we can "wr" the config we make with GUI CLI like that, like if we were working on a "real" CLI.

BTW, when you are working on the "only GUI" configuration, I cannot see any 'save configuration' on the graphical interface, does that mean the configuration is saved each time you make a modification ?

Thanks by advance,

[balaji.bandi]

its been long time i made my hands dirty with CEBoxes.

As i remember correctly they save automatically as soon as you click(modify) -

worth do small change in the GUI and check is that save ?

here is reference guide.

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-express-500-series-switches/70485-cat-exp-500-config.html

[Clem58]

Not easy to test, as we have to restart a switch to confirm, and they are in production. By the way, thanks for your answer and help.