I am working on standing up a Cisco ESR 5921 on an Ubuntu server. I followed all the installation procedures and directions correctly, but when I start I receive the following error:
root@soft-router-test2:/opt/cisco/c5921# ./c5921-swr-init.sh start
./c5921-swr-init.sh: 75: ./c5921-swr-init.sh: ./swr_reload: not found
* starting ./swr_reload...
Doing an ls-la on the directory gives this:
root@soft-router-test2:/opt/cisco/c5921# ls -la
total 352256
drwxr-xr-x 3 root root 4096 Mar 13 09:57 .
drwxr-xr-x 3 root root 4096 Mar 13 09:53 ..
drwxr-xr-x 2 root root 4096 Mar 13 09:53 c5921i86-universalk9-ms.157-3.M
-r-xr-xr-x 1 root root 162249788 Mar 13 09:54 c5921i86-universalk9-ms.SPA
-rw-r--r-- 1 root root 180387840 Mar 13 09:53 c5921i86-universalk9-tar.SPA.157-3.M
-rwxr--r-- 1 root root 3173 Mar 13 09:55 c5921-swr-init.sh
-r-xr-xr-x 1 root root 17984816 Mar 13 09:54 libdyncs.so
-rwxr--r-- 1 root root 1984 Mar 13 09:57 SWROPTIONS
-r-xr-xr-x 1 root root 24854 Mar 13 09:54 swr_reload
-r-xr-xr-x 1 root root 31671 Mar 13 09:54 swrvcon
For some reason, script can't find the file that is in the correct location on the linux box. I have inspected the script and everything seems to be correct, but I'm not sure what I'm missing. Any thoughts?
