Cisco ISR G2 EHWIC Shaping is available ? (SDWRR)

[mhiyoshi]

Hello

I think normally Modular Qos Shaping feature should be configure into routed port, however if it is switched port. Is it possible? 

Here is the related link below, it seems that IEEE 802.1P QoS (Traffic Prioritization) is available on EHWIC.

So I would be better if I can let me know how to  configire Modular Qos Shaping on this switch port.

http://www.cisco.com/c/en/us/products/collateral/routers/3900-series-integrated-services-routers-isr/data_sheet_c78-612808.html

IEEE 802.1P QoS (Traffic Prioritization) 

Each port has eight QoS queues. Strict priority is enforced by default. The routers support SDWRR with configurable weight on each queue 

Best Regards,

Masanobu Hiyoshi

[Vasilii Mikhailovskii]

Hello.

SDWRR is Layer2 QoS.

Here is a details for 3750 - http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_52_se/configuration/guide/3750scg/swqos.html#wp1163879