Hi,
We have a Nexus 5596UP, with a layer 3 card, running BGP and OSPF.
When we configure the 5596 BGP, as we have on a statnard IOS Router. To redistribute OSPF into BGP we are seeing the following message
(default) EVT: Could not obtain IGP extcomm from redist
and certain routes are not advertised into BGP.
The routes in the IGP are correct and we use a Prefix-list (via route-map) to control what gets advertised and relevant enteries are correct.
I understand a CFG maybe required but seeing if any one has seen this before first.
Thanks
