Cisco Nexus-VPC powering on

[saxenanitesh8522]

Hi,

I have a question, my secondary VPC switch need to be powered on. Should i just connect the VPC peer link and the management link for the VPC to get configured.

I have already configured VPC auto recovery incase of failure. is there anything else to be done.

[Reza Sharifi]

Hi,

If the secondary switch has not been configured with VPC in the past, in addition to powering it on and connecting the VPC peer link and the mgmt interface you still need to configure it with VPC domain id and any other VPC info you already have on the primary. 

HTH