cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
14608
Views
15
Helpful
22
Replies

Cisco router 1941 security license

islam.kamal
Level 10
Level 10

I have a cisco router 1941 and i have uploaded before evaluation license , now i have already bought cisco security license .I have already installed on cisco router , but the problem the router is still using  the evaluation license not the new license . Please advise to fix this problem.

RSP#sh flash:

-#- --length-- -----date/time------ path

1     55088360 Oct 10 2012 06:04:10 +00:00 c1900-universalk9-mz.SPA.151-4.M4.bin

2         2903 Feb 4 2013 12:23:32 +00:00 cpconfig-19xx.cfg

3      1697952 Feb 4 2013 12:23:22 +00:00 securedesktop-ios-3.1.1.45-k9.pkg

4       415956 Feb 4 2013 12:23:26 +00:00 sslclient-win-1.1.4.176.pkg

5         1038 Feb 4 2013 12:23:30 +00:00 home.shtml

6       115712 Feb 4 2013 12:23:32 +00:00 home.tar

7      2999808 Feb 4 2013 12:23:36 +00:00 cpexpress.tar

8         1564 Jan 16 2013 05:49:04 +00:00 running-config

9         2225 Mar 12 2013 13:11:46 +00:00 FCZ164191GD_20130311062353151.lic

196141056 bytes available (60346368 bytes used)

RSP#sh  version

Technology Package License Information for Module:'c1900'

-----------------------------------------------------------------

Technology    Technology-package           Technology-package

              Current       Type           Next reboot

------------------------------------------------------------------

ipbase        ipbasek9      Permanent      ipbasek9

security      securityk9    EvalRightToUse securityk9

data          None          None           None

RSP#sh license

Index 1 Feature: ipbasek9

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

Index 2 Feature: securityk9

        Period left: 8  weeks 2  days

        Period Used: 1  day  0  hour

        License Type: EvalRightToUse

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Low

Index 3 Feature: datak9

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 4 Feature: SSL_VPN

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: 0/0  (In-use/Violation)

        License Priority: None

Index 5 Feature: ios-ips-update

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 6 Feature: WAAS_Express

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

22 Replies 22

Gregory Snipes
Level 4
Level 4

You should just need to put in the "license accept end user agreement" command in global config mode and accept the agreement.

Best regards,

Greg

I hove already do that , but there is no result.

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

You should revoke the old license first.

license revoke ....

Here is the config guide with commands

http://www.cisco.com/en/US/docs/ios/csa/configuration/guide/csa_commands.html#wp1389423

HTH

Dear

I will check snd i will give the feedback

thank you

when i use the revoke command , i did not find the running license which is as above securityk9.Please advise

RSP#license revoke flash:FCZ164191GD_20130311062353151.lic flash:?

flash:FCZ164191GD_20130311062353151.lic

flash:c1900-universalk9-mz.SPA.151-4.M4.bin

flash:cpconfig-19xx.cfg

flash:cpexpress.tar

flash:home.shtml

flash:home.tar

flash:running-config

flash:securedesktop-ios-3.1.1.45-k9.pkg

flash:sslclient-win-1.1.4.176.pkg

How can i force the router to use my new license. When i also try to clea the running license , router told me

% Error: No license entries with the feature name: securityk9

Thank you

Try it without the flash: at the end:

RSP#license revoke flash:FCZ164191GD_20130311062353151.lic

HTH

dear

thank you for yur support , but i get incomplete command error. Any suggestions ,please.

thank you

Dear

Any updates please , i need to solve this problem ASAP. The license of securityK9 is built in .How can i change built in license to the license .

not sure if this is in a production environment - but you could always try to delete the old oen from flash and reload.

thats just a shot in the dark though since i am mostly a switch guy

Dear Experts

Any help please . Any updates

Thank you

Islam Kamal

Any answers pleasee

Any updates

any results

Please post the errors you see whenever you run the command:

license install flash:FCZ164191GD_20130311062353151.lic

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card