09-16-2010 02:55 PM - edited 03-06-2019 01:01 PM
Hi,
We were deploying a ftth solution with cisco equipment (switch 2960 and router 2821). With the Internet providing test, the topology worked great. But when we tried communicating between two hosts, we had to enable local proxy arp in the subinterface in the 2821. My question is, is there a way I can get rid of the 2821 and just work with the 2960? Can I enable the local proxy arp in the switch 2960?
Thanks in advance.
Regards,
Daniel
Solved! Go to Solution.
09-16-2010 06:16 PM
Hi Daniel,
2960 is a lyer-2 switch only and can not be used as a router. So, you still need your 2821 to preform routing for you.
HTH
Reza
09-16-2010 06:16 PM
Hi Daniel,
2960 is a lyer-2 switch only and can not be used as a router. So, you still need your 2821 to preform routing for you.
HTH
Reza
09-17-2010 06:06 AM
Thanks a lot for your help.
Regards,
Daniel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide