cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
615
Views
0
Helpful
3
Replies
Khaleelur Rahman
Beginner

Cisco Switch Stack (2960S and 2960X) IOS Upgrade

I have a Switch Stack that is mixed with Cisco 2960S and 2960X switches.

 

How can I upgrade the IOS of the switches in the stack without unstacking it.?

3 REPLIES 3
balaji.bandi
VIP Expert

Here is the steps :

 

So you need to prepare two different types of IOS. One for the 2960X and one for the 2960S.
For the 2960S, use the command "archive download-sw /dest 2 tftp://<TFTP IP address>/filename.tar".
For the 2960X, use the command "achive download-sw /dest 1 /dest 3 tftp://<TFTP IP address>/filename.tar".

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help

paul driver
VIP Mentor

Hello

You could also download the two different SW images but with the same SW bin versions , manually install them into the flash then reboot the stack with the new ios.



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
Martin L
VIP Advocate

Just curious, are those 2960S and 2960X switches use same IOS style: IOS vs XE ?