I have a pair of new 2960S-48TS-L switches which have the new USB console connector on them as well as the usual RJ45 type.
I thought I'd try the USB out so I got myself a USB to MiniUSB cable and downloaded the driver from CCO.
It worked straight off, but if I unplug the USB cable from either the switch or the laptop end, the session hangs and only recovers if I restart whatever application I am using and reconnect (I've tried hyperterminal, Putty and Tera Term so far)
This is obviously not ideal if working in an environment such as a lab where i need to go between different devices on the console, has anyone else tried this and had similar results? If so, did you find a fix?
Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefix...
Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 220.127.116.11 as the RP for these groups:18.104.22.168/3222.214.171.124/32126.96.36.199/24188.8.131.52/16 R2 - "advertising" its loopback0 int...
hi,i just performed an IOS upgrade and got a report that admin can't create L2 VLANs.i noticed the 'vtp primary force' and 'vtp primary mst' was applied to one of the core switch and perhaps got lost after the upgrade.how to keep the VTP primary persisten...
Meet the Authors Event - How to Troubleshoot Network Problems with Vinit Jain
(Live event – Wednesday, February 12th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Wednesday 12th, February 2020 at 10hrs PDT ...