08-30-2015 03:51 AM - edited 03-08-2019 01:34 AM
Hi Guys
Just a quick confirmation question. We have a Cisco WS-C6509-E chassis switch with the following modules
WS-C6509-E#show module all
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
3 6 Firewall Module WS-SVC-FWM-1
4 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G
--- ----- -------------------------------------- ------------------ -----------
We would like to upgrade to SUP2T Supervisor. I have cross checked all above line cards work using this link.
The only item i am not to clear about is the Firewall Service Module (WS-SVC-FWM-1) . Will it be compatible with SUP2T , are there any requirements needed from a IOS train release in order to support the WS-SVC-FWM-1 ?
Regards
Yazeed Fataar
08-30-2015 09:00 AM
Hi Yazeed,
According to this link, the firewall service module is supported with Sup 2T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide