Can anybody help me.
I am trying to configure a CME setup on a 1760 router using a POTS system - connecting through a FXO port to a standard single BT feature analogue line.
I can make outgoing calls OK
All incoming caller heres is a single ring.
thanks
Steven
Solved! Go to Solution.
Hi Steve,
The Small Business Support Community is limited to Cisco Small Business Products.
Your question below relates to a Cisco Classic Product which our community would not be able to help you with.
The best area for you to post your question would be at the Cisco NetPro forums: http://forums.cisco.com/eforum/servlet/NetProf?page=main
Best regards,
Cindy
Cindy Toy
Small Business Community Manager
Customer Advocacy
Cisco Systems, Inc.
www.cisco.com/go/smallbizsupport
Hi Steve,
The Small Business Support Community is limited to Cisco Small Business Products.
Your question below relates to a Cisco Classic Product which our community would not be able to help you with.
The best area for you to post your question would be at the Cisco NetPro forums: http://forums.cisco.com/eforum/servlet/NetProf?page=main
Best regards,
Cindy
Cindy Toy
Small Business Community Manager
Customer Advocacy
Cisco Systems, Inc.
www.cisco.com/go/smallbizsupport