Have 2948G L3 running cat2949g-in-mz.120-25.W5.27b.bin
config register = 0x2102
I enter some config statements, then save via wr mem or copy runnng-config startup-config, then reload router...the config recovers.
But If I manually power cycle the router, I lose the config and I'm back at the System Config Dialog. the show ver says:
Configuration register is 0x101 (will be 0x0 at next reload)
I also noticed that when I do the soft reload i get the "valid NVRAM config" message but when I manually power cycle the router I get the "invalid NVRAM config" message. I've changed the config to 0x2142 reloaded and then to 0x2102 and did a wr mem and then a reload but still running in to the same problem. I have a 2nd 2948GL3 at config-register 0x2102 that has no issues at all. Any suggestions are welcome.