12-04-2014 07:58 AM - edited 03-07-2019 09:47 PM
Is the config-sync feature supported on a Nexus 6001 ver 6.0.(2)N2(3)?
Thanks
Colin
Solved! Go to Solution.
12-04-2014 09:52 AM
Yes, it is supported:
The configuration synchronization mode (config-sync) allows you to create switch profiles using the config sync command on the local switch that you want to use as the master. After you create the profile, you can enter the config sync command on the peer switch that you want to synchronize.
see link:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/system_management/6x/b_6k_System_Mgmt_Config_6x/b_6k_System_Mgmt_Config_602N11_chapter_010.html
HTH
12-04-2014 09:52 AM
Yes, it is supported:
The configuration synchronization mode (config-sync) allows you to create switch profiles using the config sync command on the local switch that you want to use as the master. After you create the profile, you can enter the config sync command on the peer switch that you want to synchronize.
see link:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/system_management/6x/b_6k_System_Mgmt_Config_6x/b_6k_System_Mgmt_Config_602N11_chapter_010.html
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide