config-sync on Nexus 6001

[c.walsh]

Is the config-sync feature supported on a Nexus 6001 ver 6.0.(2)N2(3)?

Thanks

Colin

[Reza Sharifi · Accepted solution]

Yes, it is supported:

Configuration Synchronization Mode

The configuration synchronization mode (config-sync) allows you to create switch profiles using the config sync command on the local switch that you want to use as the master. After you create the profile, you can enter the config sync command on the peer switch that you want to synchronize.

see link:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/system_management/6x/b_6k_System_Mgmt_Config_6x/b_6k_System_Mgmt_Config_602N11_chapter_010.html

HTH