Hi all,
I need an advice,
I'll be replacing existing and out of support
cisco MDS 9148 FC (1 Slot) Chassis ("1/2/4/8 Gbps FC/Supervisor-3"),
version 5.2(8c)
with new
cisco MDS 9148S 16G 48 FC (1 Slot) Chassis ("2/4/8/16 Gbps FC/Supervisor")
version 8.4(2c)
Since we'd want to copy existing configuration, can you think of any configuration incompatibility?
I'd copy and paste the configuration from old to new, section by section...is there a better way?
Thanks in advance!
