Configuration of Voice VLAN on the any port (Switch Cisco SG350)

Firass.elheilani · ‎03-05-2019

Hello All,

I have three vlan in the switch

Vlan 1 Data

Vlan 20 Voice

Vlan 90 Native

I would like to configure the port to take the vlan Voice but when I tried is not possible to put

Switchport voice vlan 20

So I would like to help me How I can configure the vlan voice in my ports

Thanks for helping

marce1000 · ‎03-05-2019

Use : switchport access vlan 20

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Georg Pauwen · ‎03-05-2019

Hello,

as far as I recall on the SG350, for the voice vlan to work, thr port must be either in trunk or in general mode...

balaji.bandi · ‎03-05-2019

As per i know - the SG3XX Family only supports one Auto voice vlan. When a switchport has both a phone and computer connected to the same port, the data will be part of whatever vlan is untagged on that port. The phone will be part of the voice vlan you have assigned to the phone.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help