Configuration of Voice VLAN on the any port (Switch Cisco SG350)

[Firass.elheilani]

Hello All,

I have three vlan in the switch

Vlan 1 Data

Vlan 20 Voice

Vlan 90 Native

I would like to configure the port to take the vlan Voice but when I tried is not possible to put

Switchport voice vlan 20

So I would like to help me How I can configure the vlan voice in my ports

Thanks for helping

[Firass.elheilani]

Hello All,

I have three vlan in the switch

Vlan 1 Data

Vlan 20 Voice

Vlan 90 Native

I would like to configure the port to take the vlan Voice but when I tried is not possible to put

Switchport voice vlan 20

So I would like to help me How I can configure the vlan voice in my ports

Thanks for helping

[marce1000]

 Use : switchport access vlan 20

 M.

[Georg Pauwen]

Hello,

as far as I recall on the SG350, for the voice vlan to work, thr port must be either in trunk or in general mode...

[balaji.bandi]

As per i know - the SG3XX Family  only supports one Auto voice vlan. When a switchport has both a phone and computer connected to the same port, the data will be part of whatever vlan is untagged on that port. The phone will be part of the voice vlan you have assigned to the phone.