Configuring Management port in Catalyst 4500-X series

[Sivan]

Hello, 

I brought a new Catalyst 4500-X switch with 16 SFP+ interfaces. I saw a management interface (Ethernet) on the back side of the switch. I wanted to use that port to connect to my management network (172.20.200.X range) to configure the switch via web interface. I logged in via console, but it shows only the SFP interfaces. Someone please help me to get a static IP for the MGNT port and enable web server and access the switch. Much appreciated. 

[Mark Malone]

Hi
off my 45x , the F1 is your MGMT and its under a permanennt VRF


interface FastEthernet1
description MGMT
vrf forwarding mgmtVrf
ip address 172.x.x.x 255.255.254.0
speed auto
duplex auto

ip route vrf mgmtVrf 0.0.0.0 0.0.0.0 172.x.x.x

[Mark Malone]

It wont show it in show ip int bri , only in global conf

[luis_cordova]

Hi @Sivan ,

About the use of the management interface (me1):

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/10594-8.html

About the configuration of the web interface:

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/15954-105-15954.html

Regards