Hello folks, We are having media network and which always involves large file transfers. Currently our network consists of Cisco 4500-X series switch which is connected to devices with 10G and 1G ports (copper cables). We wanted to upgrade the networ...
Hi folks, I am configuring a new C9300 - 24 port switch via CLI. I have set an IP for the MGMT interface on the back side of the unit, and trying to access the device via web portal. I am getting the portal, but the default user name and password doe...
Hello guys,I have a Catalyst 4500-X switch which is having all TenGigabyteEthernet ports. I am using a mix of 10Gbe SFP fibre modules and 1 Gbe SFP Ethernet modules. My issue is some of the ports doesn't comes up if i remove and reconnect the cables ...
Hi amazing people, i need an urgent help. I have a HP Procurve J9030A switch, which is having more than 15 VLANs. I brought 2 new Cisco 4500-x switch as main and backup and i have connected some devices which are in VLAN 40 in all the switches. In HP...
Hello, I brought a new Catalyst 4500-X switch with 16 SFP+ interfaces. I saw a management interface (Ethernet) on the back side of the switch. I wanted to use that port to connect to my management network (172.20.200.X range) to configure the switch ...
this issue fixed, it was due to no default user was present in the switch, i added a new user and it works, followed this thread. https://community.cisco.com/t5/switching/catalyst3750-how-to-reset-web-interface-user-password/td-p/1763217
Hi @balaji.bandi ,It doesn't helped. Nothing is changed on the CLI except the enable password and secret for the CLI mode. I have the CLI access. Anything we can see or change via CLI ?
Hi Mark,I am on Version 03.06.03.E. I tried to update the software via CNA GUI, but it returns me a message saying File size is bigger than allowed in TFTP server. So i scared to do as i dont know the right procedure to do. Also its a bit expensive s...
