03-25-2019 08:15 AM
Hello,
I brought a new Catalyst 4500-X switch with 16 SFP+ interfaces. I saw a management interface (Ethernet) on the back side of the switch. I wanted to use that port to connect to my management network (172.20.200.X range) to configure the switch via web interface. I logged in via console, but it shows only the SFP interfaces. Someone please help me to get a static IP for the MGNT port and enable web server and access the switch. Much appreciated.
03-25-2019 08:27 AM
03-25-2019 08:31 AM
03-25-2019 08:34 AM
Hi @Sivan ,
About the use of the management interface (me1):
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/10594-8.html
About the configuration of the web interface:
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide