COnfiguring SSH on Cisco 2811 Routers

[m-abooali]

Hi Guys,

we have two Cisco 2811 routers here functioning as border routers running BGP, so very eesential to our operation but the admin before me ( I have just gotten here) had tried to configure ssh on those router but at this time we cannot access these two routers although functioning.

telnet and ssh1, ssh2 both doesn't accept the login information. I am using SecureCRT and it gets to the routers but login fails.

I want to use con and bet to these boxes but wanted to see how I woul set up ssh2 on these boxes before I do that.

Thx,

Mike

[Edison Ortiz]

Here is how you configure SSH

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsec_c/part25/ch10/index.htm

Keep in mind, for SSH support, you must be running a k9 image.