cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
22572
Views
25
Helpful
3
Replies

Configuring static arp in nexus

Gilberto Marcos
Level 1
Level 1

Hello every one.

Can anybody help me with the correct commands that are use in cisco nexus 5000 for static arp?

We try:

arp 10.88.2.19 03bf.0a58.0213

we got an error on it.

Thank you for your help

3 Replies 3

Eugene Lau
Cisco Employee
Cisco Employee

hello

Static arp for NLB multicast mac - See here. Cisco Nexus 5000 NX-OS Software Rel 5.0(3)N1(1)

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/unicast/5_0_3_N1_1/l3_ip.html#wp1184542

HTH

Eugene.

I read the document, but I still have a question, can you do a static arp on an SVI?
 

Thanks!

Hi ,

 

Yes, you can do . its supported, tried in lab and its working 

 

Ex :

interface Vlan20
  no ip redirects
  ip address x.x.x.x/24
  no ipv6 redirects
  ip arp 20.20.20.20 0019.077C.1A77

 

HTH
Regards,
VS.Suresh.
*Plz rate the usefull posts *

Review Cisco Networking for a $25 gift card