Configuring the NEXUS 9300 Line Console and Line VTY

[scottcummins]

Good day all

I have a new NEXUS 93128 with IP services , I have never configured or even seen one till now. I am trying to configure it with an identical config that I have on a pair of stacked 3750s. I have used the conversion tool and seem to have configured the VLANs, Port-channels and Interfaces with little trouble. However, the Global elements are a different story. RADIUS, aaa, SNMP-SERVER and particularly Line console and Line VTY are worrying me because I can't seem to find the command line structure or if it is even part of the NX OS I have on the box. I have searched the documentation, and I am thinking a lot of it has been changed or isn't available.

The conversion tool says there is "no mapping" for most of it.

I have uploaded both configs,  the stacked 3750's and the 93128 I am trying to configure to replace them.Any guidance or specific documentation would be greatly appreciated

 

[Reza Sharifi]

Hi,

Correct, there is no mapping, because Nexus-OS is different.  There is no line vty 0 4 or line console 0  just like the traditional IOS.  There is however "line vty" with no numbers and also "line console" with no number.

HTH

[scottcummins]

I saw those "Line console" and "line vty". is there a document on there utilization? or what they are configured for?

[Reza Sharifi]

Here is document on vty and console for Nexus.

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fundamentals/521n11/b_5k_Fund_Config_521N11/b_5k_Fund_Config_521N11_chapter_0110.html#con_1173451

HTH

[scottcummins]

Thanks Reza

I will use the document and see if I can get it configured