Confirm boot statement

[rshum]

I'm going to upgrade the IOS on a 6509. I have the new image loaded and just want a confirmation that the boot statement I have on it is correct.

Here's what I have in the config:

boot-start-marker

boot system flash bootdisk:

boot system flash bootdisk:/s2t54-adventerprisek9-mz.SPA.150-1.SY4.bin

boot-end-marker

Here's the images on flash:

#dir

Directory of bootdisk:/

   2  -rw-    33554432   Mar 5 2013 22:22:36 +00:00  sea_console.dat

   3  -rw-       26163  Mar 24 2013 02:45:30 +00:00  startup-config.converted_vs-20130324-024203

   4  -rw-    91068320  Mar 24 2013 02:13:14 +00:00  s2t54-adventerprisek9-mz.SPA.150-1.SY1.bin

   6  -rw-    91133856  Apr 22 2013 15:37:54 +00:00  s2t54-adventerprisek9-mz.SPA.150-1.SY4.bin

   5  -rw-    33554432   Mar 5 2013 22:44:32 +00:00  sea_log.dat

Thanks

[InayathUlla Sharieff · Accepted solution]

Hi,

Yes you have the corect configuration set for bootvariable.

boot-start-marker

boot system flash bootdisk:s2t54-adventerprisek9-mz.SPA.150-1.SY4.bin

boot-end-marker

HTH

Regards

Inayath

*Plz rate all usefull posts.

[rshum]

Thanks for the quick response. My concern was really if the "/" I put in after the bootdisk:is correct.

[inayathulla1 · Accepted solution]

Hi,

There is no need to specify '/" parameter under bootdisk statement.

Below thread had many issues booting just go through once it might help give you some more info in case the module doesnt come up properly.

HTH

Regards

Inayath