ā09-23-2021 11:23 AM - edited ā09-23-2021 11:44 AM
Hi All,
I have configured inter vlan routing with static ip addresses successfully then decided I should setup a Dedicated DHCP Server
I believe I have configured it right However something is wrong as I cannot ping Vlan Interfaces form the DHCP Server and I keep getting DHCP Failed APIPA is being used on the end PC's I also checked the status of the interface that is on the L3 Switch that is connected to my DHCP Server. I have connected to the server and IT's Down that's where the issue is I have tried to bounce the interface with "Shut" "No Shut" I have configured the interface as access that is connected to the server
Solved! Go to Solution.
ā09-23-2021 12:33 PM
Hello,
the default gateway of the DHCP server needs to be in the 192.168.4.0/24 range. You were using the wrong interface (GigabitEthernet0/1) on the L3 switch, with the wrong IP address.
Attached the working file with the DHCP server handing out IP addresses...
ā09-23-2021 11:44 AM
Hello,
post the zipped Packet Tracer project (.pkt) file...
ā09-23-2021 11:48 AM
Okay just tried to add lab file strangely will not let me do so
ā09-23-2021 11:54 AM
ā09-23-2021 12:33 PM
ā09-23-2021 12:36 PM
Thank you very much for the help and pointing me in the right direction it's usually the simple stuff thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide