converter tool IOS to IOS xe

[lkadlik]

Hi,

Is there a tool that will convert a config file configured in IOS ( 3750)  to a format  that can be used in ios XE (3650)?

Thank you.

Lynne

[Leo Laohoo]

Cisco IOS to NXOS Configuration Converter

[Philip D'Ath]

The user was after an IOS-XE config, not a Nexus config.

The IOS config will mostly go across.  If you are using AAA you'll need to be using the newer syntax (which you may already be using).  Also the QOS config is like a "standard" router, and not like the older 3750 style.

[lkadlik]

Hi,

Yes.  As the qos config is fairly complicated I was hoping to find a converter I could use to redo the config for the new switches.

Thank you.

Lynne

[Philip D'Ath]

I would do the QoS again.  The QoS engines in the 3750 and 3650 are very different.

[Rolf Fischer · Accepted solution]

Lynne,

it it not a "simple button" but this document should be very useful to convert the QoS-config from old (MLS) 3k to "Next Generation 3k" (3650/3850) switches:

118629 - 3750 MLS to 3850 MQC Conversion of QoS Configuration

HTH
Rolf

[lkadlik]

Hi,

Unfortunately that does not seem to work. I am going from a 3750 switch to a 3650 switch.  I am trying to convert the MLS qos on the 3750 to a config that can be used on the 3650 which uses MQC qos and the Xe software.

Thank you.