copy from TFTP to flash

[davinci]

I need help with TFTP command syntax.  What is wrong here?

image resides on solarwinds TFTP within C:\TFTP-Root.  Devices are reachable too and TFTP service is active.

SWITCH#copy tftp: flash:
Address or name of remote host [x.x.x.x]?
Source filename [C:\TFTP-Root/AIR-CT5500-K9-8-5-151-0.aes]?
Destination filename [AIR-CT5500-K9-8-5-151-0.aes]?
Accessing tftp://x.x.x.x/C:\TFTP-Root/AIR-CT5500-K9-8-5-151-0.aes...
%Error opening tftp://x.x.x.x/C:\TFTP-Root/AIR-CT5500-K9-8-5-151-0.aes (Timed out)

[luis_cordova]

Hi @davinci ,

Just to discard,
Verify that the firewall is not blocking the TFTP port.

Regards

[davinci]

yes, no firewall blocking

[luis_cordova · Accepted solution]

Hi @davinci ,

Have you tried this?:

SWITCH#copy tftp: flash:
Address or name of remote host [x.x.x.x]?
Source filename  [C:\TFTP-Root/AIR-CT5500-K9-8-5-151-0.aes]? AIR-CT5500-K9-8-5-151-0.aes
Destination filename [AIR-CT5500-K9-8-5-151-0.aes]?

Regards

[davinci]

Thanks, this worked.

[marce1000]

 Hmmm, I am a bit wary , with the switch platform handling these C:\ (backslash) denotions ; could you just make the root of the tftp server to the file location directory on Windows (so you only need to input the filename on the  switch) ?

 M,

[davinci]

yes, I have file in the C:\TFTP-Root directory.  I have tried both ways with the switch copy tftp syntax, only specifying filename and also adding tftp directory

[balaji.bandi]

couple of steps to test before you copy.

1. from Switch you able to ping the TFTP Server IP address - yes - step 2 ( if not fix the changeability)

2. Step2 as @marce1000  suggested, the souse should be file name, the file should be in TFTP root folder. to copy