cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

618
Views
0
Helpful
1
Replies
Highlighted
Beginner

CWDM support on 4500E SUP7-E uplink ports

Does anybody know if CWDM pluggables are supported on the SUP7-E uplink ports?

The SUP7-E datasheet says "NO":

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-612364.html

The Compatibility Matrix says "YES":

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html

Thanks

Manuel Linder

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: CWDM support on 4500E SUP7-E uplink ports

It is supported.  At the bottom of the paragraph for pluggables it says this:

For details about the different optical modules  and the minimum Cisco IOS Software release required for each of the  supported optical modules, visit http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

That points to the compatibility matrix which says it is supported.  The compatibility matrix is more updated then the product datasheet.  I also checked our internal compatibility matrix as well and confirmed it.

-Matt

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Re: CWDM support on 4500E SUP7-E uplink ports

It is supported.  At the bottom of the paragraph for pluggables it says this:

For details about the different optical modules  and the minimum Cisco IOS Software release required for each of the  supported optical modules, visit http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

That points to the compatibility matrix which says it is supported.  The compatibility matrix is more updated then the product datasheet.  I also checked our internal compatibility matrix as well and confirmed it.

-Matt

View solution in original post

CreatePlease to create content
Content for Community-Ad