Data center switch selection

[graeme.antrobus]

Hello, I have a need for 2 ToR switches to support a VM server platform within a single rack.

The switches needs to share a total of 18x10GbE (SFP+ or RJ-45 for the servers) ; 5x1GbE (RJ-45 for management) & 2x10GbE (SFP+ connection to Core LAN architecture) ports.

Is there an appropriate Catalyst switch that can support the above port options?

Thank you

[Reza Sharifi]

Hi,

Since you will be using these switches for servers and VM connectivity, I recommend using the Nexus series and not the Catalyst. The Nexus is designed to be used in data centers.

Here is a couple of links for the 9k series:

https://www.cisco.com/c/dam/en/us/products/switches/nexus-9000-series-switches/nexus-9300-10GbaseT-switches-comparison.html

https://www.cisco.com/c/en/us/products/switches/nexus-9000-series-switches/index.html

HTH

[balaji.bandi]

Look at the CVD. and understand the DC architecture and design and opt right Cisco Model for your needs, as suggested Nexus is the right choice for DC.

https://www.cisco.com/c/en/us/solutions/design-zone/data-center-design-guides.html

[Leo Laohoo]

Two Nexus 5K would fit the bill.
Nexus 5K will allow you to deploy, if necessary, 2K FEX extenders.