10-12-2010 06:34 AM - edited 03-06-2019 01:27 PM
Hi Friends,
I have a 3524 Switch with IOS c3500XL-c3h2s-mz-112.8.2-SA6.bin.
I want to enable default and static route commands by using "ip route" command. but it's not supporting the same.
Can any one advice me why it is not supporting (I belive it's IOS Issue) and give me the alternate solution..
Thx,
limat..
Solved! Go to Solution.
10-12-2010 06:55 AM
The 3524 is not a MLS (layer 3 routing capable device), so use ip default-gateway instead.
Regards,
bastien
10-12-2010 09:01 AM
The 3524 is a layer 2 device only and will not do any routing . The address on the switch is used to manage the switch only and ip default gateway is used to get to the L3 routing device for the management address . You will need a L3 device (router or L2/3 switch) to do any routing .
10-12-2010 06:55 AM
The 3524 is not a MLS (layer 3 routing capable device), so use ip default-gateway instead.
Regards,
bastien
10-12-2010 09:01 AM
The 3524 is a layer 2 device only and will not do any routing . The address on the switch is used to manage the switch only and ip default gateway is used to get to the L3 routing device for the management address . You will need a L3 device (router or L2/3 switch) to do any routing .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide