cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
309
Views
0
Helpful
1
Replies

Destination Host Unreachable

qjygsantos
Level 1
Level 1
 

Hi, I am practicing subnetting and trying to build a small network. I created the subnet and the addresses as follows:

ccccc.JPG

 

Here is the topology:

ddddd.JPG

When I try to ping from PC0 to PC1, or other PCs under the same router, it works. But if I try to ping, for example, PC4 from PC1, it says "Destination Host Unreachable". I'm trying to find where did I get the configuration wrong but I can't find it. Can someone check where is my mistake?

 

Please check the attached file, inside it is the pkt. Thanks!

1 Reply 1

Hi

Take a look on the file I attached.

As you router have only one connection, you can fix the communication between router by using static routes like this:

ip route 0.0.0..0 0.0.0.0 172.40.0.33 on router 2

ip route 0.0.0..0 0.0.0.0 172.40.0.34 on router 1

 

 

Review Cisco Networking for a $25 gift card