DHCP failed APIPA is being used.

[guatex]

Hey there i am doing a project for myself. But i get an error: "DHCP failed APIPA is being used". How can i fix this? Thanks

Packet Tracer File 

[M02@rt37 · Accepted solution]

Hello @guatex 

you have to configure port Fa 0/6 (guneysw01)  where your DHCP server is plug:

After that PC should have IP ADD by DHCP:

[M02@rt37 · Accepted solution]

@guatex 

Also i am trying to send icmp from pc to istanbul branch server and couldnt do it? do you know why it happens

First adjust your DHCP pool configuration:

.65 as Gw ok but first IP not .64 but .67, since .64 is the network address and .66 is the DHCP server's IP

Then, reconfigure the interco between Switch and Router10:

Sub interface on Router10

Trunk on the Switch:

Also, on Istanbul side, reconsider to reconfigure the Trunk ports on all 3 switches. 

Fa0/3 switch guneysw02 and 03 should be a trunk 

On guneysw04 also, fa0/1, fa0/2 and fa0/3 too as trunk ! Also add on that sw guneysw04 vlan 20 and 30 in its database!

After that ping should be OK:

[M02@rt37 · Accepted solution]

@guatex 

Add on the Router on the right, under config terminal:

0.0.0.0 0.0.0.0 22.22.22.x

22.22.22.x the IP of the interface on the Left Router.

Same things on the Left Router, add route:

0.0.0.0. 0.0.0.0 22.22.22.y

22.22.22.y the IP of the interface on the right Router.