06-11-2014 10:35 AM - edited 03-07-2019 07:42 PM
Can anyone confirm for me whether or not the Catalyst 2960X can function as a DHCP server? I did use the feature navigator and the answer seems to be no, but I wanted to get confirmation because I'm not sure I was using the tool correctly. Thanks, Mike
06-11-2014 10:44 AM
Hello
apparently is can
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_01101.html
Res
paul
06-11-2014 10:58 AM
OK, so how do I confirm which software version supports this?
"Your software release may not support all the features documented in this module."
I'd really like to know how I could confirm this info on my own using the feature navigator.
Thanks, Mike
06-11-2014 11:52 AM
Hello
what iOS are you currently using - that URL referenced 15.0 train
you could also try enabling it to test if it supported
config t
service dhcp
ip dhcp pool Test
If you find cisco navigator hard to use then maybe you could try using the support guides and check out the command references for your switch
http://www.cisco.com/c/en/us/support/switches/catalyst-2960-series-switches/products-command-reference-list.html04-10-2017 01:01 AM
Hello,
Can anyone confirm for me whether or not the Catalyst 2960X can function as a DHCP v6 server?
Thanks
Regards
Syamsul
04-21-2017 08:44 AM
According to the Cisco Feature Navigator the 2960X does not support this. You could test for sure by trying to configure the feature.
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/15-2mt/ipv6-15-2mt-book/ip6-dhcp.html#GUID-D7BDF558-0F3D-473F-AF16-AC7AD8172778
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide