02-15-2023 07:45 AM
CUAL ES LA DIFERENCIA ENTRE LOS SWITCHES MODELO 1000-48FP-4G-L Y LOS MODELO C1000-48P-4G-L?
En el brochure dice q ambos equipos tienen 48 puertos con capacidad POE, sin embargo, en otras fuentes, dice que el modelo 48P , solo tiene 24 (de los 48 puertos con los que viene) con POE , y los otros 24 no.
Igualmente, hay modelos que indican 4X, en lugar de 4G
Gracias
Solved! Go to Solution.
02-16-2023 12:20 AM
as i clarified, all the ports in the 48 ports can be used for PoE, subject to power availability,
example - if the document mentioned 370W / 15W (device) - you can only add maximum 24 devices to that switch
if it is 750W / 15W = 48 ports can be used for PoE
hope this helps you ( as example)
02-15-2023 02:25 PM
C1000-48P-4G-L |
48x 10/100/1000 Ethernet PoE+ and 370W PoE budget ports, 4x 1G SFP uplinks |
C1000-48FP-4G-L |
48x 10/100/1000 Ethernet PoE+ ports and 740W PoE budget, 4x 1G SFP uplinks |
because of the PSU
02-15-2023 02:44 PM
02-15-2023 03:08 PM
It all depends on PSU capacity more PSU means more POE.
02-15-2023 03:16 PM
02-15-2023 03:34 PM
always refer cisco product guide,
02-15-2023 03:47 PM
02-16-2023 12:20 AM
as i clarified, all the ports in the 48 ports can be used for PoE, subject to power availability,
example - if the document mentioned 370W / 15W (device) - you can only add maximum 24 devices to that switch
if it is 750W / 15W = 48 ports can be used for PoE
hope this helps you ( as example)
02-16-2023 10:05 AM
thank you very much . Now it is completely clarified !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide