Difference between WS-X4548-RJ45V+ and WS-X4548-GB-RJ45V

[vihill]

I'm designing a large number of 4507R-E and 4510R-E chassis with either dual-WS-X4516-10GE or WS-X45-SUP6-E supervisors.

At least class 2 PoE is required to all ports.

For the same retail price, Cisco's offering the WS-X4548-RJ45V+ and WS-X4548-GB-RJ45V.

What's the difference? I've quested through CCO for an answer but am no wiser.

I'd like to stick to one line card across all chassis, independent of supervisor. If possible, which one should I use?

Thanks,

Vic

[rtjensen4]

This link should help: http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

Looks like the difference is that the RJ45V+ card can provide up to 30w per port vs the standard 15w

[sdheer]

WS-X4548-RJ45V+ Cisco Catalyst 4500 48-Port 802.3af PoE and
802.3at PoEP 10/100/1000 (RJ-45)

WS-X4548-RJ45V+:

. 48 ports

. 10/100/1000 (RJ-45)

. Cisco IOS Software Release 12.2(50)SG or later

. IEEE 802.3af/at and Cisco prestandard PoE, IEEE 802.3x flow control

. Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port
group

. Capable of up to 30W of inline power per port

. Enterprise and commercial: designed to power next-generation IP phones,
wireless base stations, video cameras, and other PoE devices that require
power up to 30 watts

WS-X4548-GB-RJ45V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100/1000, 48 Ports (RJ-45)

WS-X4548-GB-RJ45V:

. 48 ports

. 10/100/1000 (RJ-45)

. Cisco IOS Software Release 12.2(18)EW or later

. IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control

. Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port
group

. Enterprise and commercial: designed to power IP phones, wireless base
stations, video cameras, and other IEEE-compliant powered devices

http://tools.cisco.com/squish/222EE

Hope that helps.

Regards,
Swati

Please rate post if you find content useful