03-07-2012 03:56 PM - last edited on 03-25-2019 04:18 PM by ciscomoderator
Hello,
I have five Cisco ISR G2 2921 routers, and I want to be able to manage them with Cisco Configuration Protocol.
1. Do I need to have Cisco Discovery Protocol (CDP) enabled to utilize a "topology-map creator" within the CCP to create a topology map? (I am not even sure if this is a feature of CCP)
2. Do I need any ports open on the router to use CCP, ie. http, https, etc.?
Thanks,
Cliff
Solved! Go to Solution.
03-07-2012 04:51 PM
Hi,
For CCP, you need to enable these commands:
Step 2. Enable the router HTTP or HTTPS server using the following Cisco IOS Software commands.
Router(config)# ip http server
Router(config)# ip http secure-server
Router(config)# ip http authentication local
You also need IOS 15 on the router.
HTH
03-07-2012 04:51 PM
Hi,
For CCP, you need to enable these commands:
Step 2. Enable the router HTTP or HTTPS server using the following Cisco IOS Software commands.
Router(config)# ip http server
Router(config)# ip http secure-server
Router(config)# ip http authentication local
You also need IOS 15 on the router.
HTH
03-07-2012 07:23 PM
You are great!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide