cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

173
Views
0
Helpful
1
Replies
Highlighted
Beginner

doing changes on random multiple interfaces on cat9300

Hi folks,

I am writing a MOP, but do not have a cat9300 handy. Idea is to change the vlan on multiple random ports at the same time rather than going to the individual port. I know there is a range command that makes you select the port range, but that might not do for random ports across the stack members. 

In short, can i change the vlan for ports - 3/0/1, 4/0/10, 5/0/15,2/0/14... and so on (all random) in a single statement? 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Expert

Re: doing changes on random multiple interfaces on cat9300

Hi,

Yes, as long as they are stacked:

 example:

interface range gigabitEthernet 1/0/1 , gigabitEthernet 2/0/1 , etc...

HTH

1 REPLY 1
VIP Expert

Re: doing changes on random multiple interfaces on cat9300

Hi,

Yes, as long as they are stacked:

 example:

interface range gigabitEthernet 1/0/1 , gigabitEthernet 2/0/1 , etc...

HTH

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards