We just received Cisco 4321 and 4331 routers with 2x NIM-ES2-8-P modules installed that we planned on using to backfill older switches and routers in areas with less than 14 users. The switch ports on the modules will be used as access ports and company policy is to configure all access ports with MAB authentication for all workstations and VoIP phones. We used the configuration below on the ports, but the problem is the VoIP phones won't authenticate; the option to use dot1x host-mode multi-domain is not available (see output).
We have IP Base licenses and the securityK9 license activated, not sure if it's an IOS defect, that way on purpose, I don't have a certain license, or if I'm missing a command to activate it. Any ideas on how we can get VoIP working with this scenario?
GoalDocumentationDefineAdd Device to Smart AccountSync Smart Account via vManage1.1 VNF package for vBranchDesignDeployOperate
To successfully provision a ENCS device in remote site with internet connection.
Minimum software relea...
はじめに確認方法Version による Application name の変更について備考参考情報 はじめに本ドキュメントでは Cisco SD-WAN における Policy 上で設定可能な Application を確認する方法について記載しています。 確認方法サポートされている Application name についてはご使用されている vManage へ API を呼び出して確認することが可能です。https://<IP or FQDN>/...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where the spok...
On 24th August 2021, Cisco announced the latest IOS XE release - Cisco IOS XE Bengaluru 17.6.1a
IOS XE 17.6.1a unlocks various routing features and enhancements comprehensively covering different technology segments such as voice, security,...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where th...