Dual isp

[elite2010]

Hi ,

If i have the following scenario  and ASA in active standby mode , will it work ? . How can i utilize both ISP ?

-----ASA1----Router  1 -----ISP1

-----ASA1----Router 2 -----isp2

Please help 

[togrul.azizli]

Hi ,

Is it Failover or FHRP (HSRP) active standby ?

[elite2010]

Hi 

Now is HSRP .

[togrul.azizli]

Among HSRP,VRRP and GLBP only GLBP can be used as Active-Active so you can use both ISPs then configure GLBP instead of HSRP. So you can load-balance your inside traffic to go outside via two different ISPs .

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_glbp.html

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-services/product_data_sheet0900aecd803a546c.html

Hope it helps

[elite2010]

Hi

Asa also should be active /active ? 

Thanks

[togrul.azizli]

You will configure GLBP as normal HSRP (I mean same idea , you give Virtual IP) and there is little bit difference in configuration , the difference between GLBP and other FHRP protocols is that the ASAs will be Active/Active. For inside devices the gateway will be Virtual IP that you gave ,like in HSRP but GLBP will load-balance your traffic .

You can see GLBP explained in youtube or cisco documentations.

Regards

Let me know if it helps