11-24-2007 03:51 AM - edited 03-05-2019 07:36 PM
Hello
check this Eigrp Config for the Attached Diagrams:
DS1
riuter eigrp 10
no auto-summary
Passive-interface Default
no Passive-interface int port-channel 0
network 100.100.100.1 0.0.0.0
network 10.10.10.0 0.0.0.255
!
ip route 0.0.0.0 0.0.0.0 100.100.100.5
!
DS2
riuter eigrp 10
no auto-summary
Passive-interface Default
no Passive-interface int port-channel 1
network 100.100.100.2 0.0.0.0
network 10.10.10.0 0.0.0.255
!
ip route 0.0.0.0 0.0.0.0 100.100.100.1
!
IS THIS CONFIG WORK FINE...
10XS
11-24-2007 06:09 AM
The configuraion looks good but for the default route I think it is better in inject to EIGRP on the core router (ip default network or redistribute static..)
11-24-2007 07:53 AM
hello!
10xs for ur reply.plz give the Config on both Side?
10xs
11-26-2007 03:56 AM
hello Experts!
any clear reply Here
10xs
11-26-2007 04:59 AM
I can see a problem according to your diagram. Your DS1 has the line network 100.100.100.1 0.0.0.0. It should say network 100.100.100.6 0.0.0.0. 100.100.100.1 is on your core router, not on DS1.
Kevin Dorrell
Luxembourg
11-26-2007 10:35 AM
hello,
because we don't have your full configuration, i can guess about this
best way to do this is to create between DS1 & Core port-channel 1 and between DS2 & Core port-channel 2
for easy debuging, try to assign ip addresses from different networks to each port-channel
on Core on interface Port-Channel 1 use ip address 172.16.10.1 255.255.255.0
also on Core but on interface Port-channel 2 use ip address 172.16.20.1 255.255.255.0
on DS1 port-channel 1 use next ip address 172.16.10.10 255.255.255.0
and on DS2 port-channel 2 use ip address 172.16.20.10 255.255.255.0
next, our routing configuration
on Core:
!
router eigrp 10
no auto-summary
network 172.16.10.0 255.255.255.0
network 172.16.20.0 255.255.255.0
!
! also here you can inject your default route, or you can redistribute 0/0 from your table, is up to you
!
on router DS1:
!
router eigrp 10
no auto-summary
network 172.16.10.0 255.255.255.0
!
on router DS2:
!
router eigrp 10
no auto-summary
network 172.16.20.0 255.255.255.0
!
i hope this will be helpfully to you
vanguardro
11-26-2007 10:37 AM
10XS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide