cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
482
Views
0
Helpful
4
Replies
kirilllissitsyn
Beginner

Embedded Packet Capture problem on 2911 serial sub-interface.

  Hi all!

I'm unable to monitor any packets with EPC on Serial interfaces but Ethernet interfaces working just fine. I need exactly WAN monitoring on Serial sub-interfaces (Serial0/0/0:15, Serial0/0/1:15 etc.) because they are connected to our upstream VoIP provider (related to other VoiP problem).

 Is this a software bug or am i missing something? 

 Thanks!

 

C2900 Software (C2900-UNIVERSALK9_NPE-M), Version 15.7(3)M5

Cisco CISCO2911R-V/K9 (revision 1.0)

 

2911-3#show monitor capture point all
Status Information for Capture Point CP
IPv4 CEF
Switch Path: IPv4 CEF , Capture Buffer: BUF
Status : Active

Configuration:
monitor capture point ip cef CP Serial0/0/0:15 both

2911-3#show monitor capture buffer BUF para
Capture buffer BUF (linear buffer)
Buffer Size : 15360000 bytes, Max Element Size : 68 bytes, Packets : 0
Allow-nth-pak : 0, Duration : 0 (seconds), Max packets : 0, pps : 0
Associated Capture Points:
Name : CP, Status : Active
Configuration:
monitor capture buffer BUF size 15000 linear
monitor capture point associate CP BUF
2911-3#

4 REPLIES 4
pieterh
VIP Collaborator

did you issue the start the capture command? : monitor capture point start CP

Of course. If i didn't then the Status would be Inactive

kirilllissitsyn
Beginner

The "FUN" thing, that SPAN doesn't recognize Serial interfaces as Source so it's unavailable. 

 

2911-3(config)#mon session 1 source interface ?
GigabitEthernet GigabitEthernet IEEE 802.3z
Port-channel Ethernet Channel of interfaces

2911-3(config)#


RITE also doesn't work on Serial interfaces. Configuration accepted but 0 packets goes from Se0/0/0:15 to Gi0/2.

 

So sad

Giuseppe Larosa
Hall of Fame Master

Hello @kirilllissitsyn ,

if you have ISDN PRI E1 with the provider you can use debug commands to see activity on D channel :15

 

debug isdn q921         ! L2 ISDN

debug isdn q931         ! L3 ISDN

 

Hope to help

Giuseppe