Dear All
I have a C2960S stack with 3 stack members. I have configured two vlans namely vlan1 and vlan2.
vlan1 having interface 172.16.2.11 255.255.0.0
vlan2 having interface 192.168.1.22 255.255.255.0
(Please note that these two vlans have different subnets also)
I have enabled static routing by giving "ip routing" command
I want to configure static route between the two vlans.
Here we have the iOS version & details
Switch#sh version
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)SE10a, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Thu 03-Nov-16 13:52 by prod_rel_team
ROM: Bootstrap program is C2960S board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
Switch uptime is 1 week, 1 day, 2 hours, 11 minutes
System returned to ROM by power-on
System image file is "flash:/c2960s-universalk9-mz.150-2.SE10a/c2960s-universalk9-mz.150-2.SE10a.bin"
Any help is much appreciated.
Best Regards,
Amit Datekar.