03-20-2019 12:15 PM
Is there a way to enable jumbo frames on a per interface or per vlan basis on the Catalyst 9400 like you can on a N7K? I know you can enable it system wide, but wanted to see if possible to limit it to a single vlan.
Solved! Go to Solution.
03-20-2019 01:50 PM
Hi @mumbles202 ,
According to this guide, it is not possible:
When configuring the system MTU values, follow these guidelines:
The device does not support the MTU on a per-interface basis.
I leave the link of the guide:
I hope it's useful for you
Regards
03-20-2019 01:50 PM
Hi @mumbles202 ,
According to this guide, it is not possible:
When configuring the system MTU values, follow these guidelines:
The device does not support the MTU on a per-interface basis.
I leave the link of the guide:
I hope it's useful for you
Regards
03-20-2019 02:18 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide