Enhanced Object Tracking and 2960S LAN Base

[l.buschi]

HI all,

I have a 2960S with lan base IOS and default SDM set to lanbase routing.

Static routing is perfectly working.

I configured an icmp IP SLA checking a remote destination reachability.

I need to track into the SLA in order to configure a static route with object tracking.

The feature navigator confirm that 2960S can handle enhanced object tracking.                   

IP route commands support track-table statements but I have no way to configure an object connected to my IP SLA.

Do you know a way to do this?

Tks

Johnny

[moThaSeb]

Hi, 

I will be glad to know if you were able to fix the problem. 

I'm running into exactly the same problem. I tried several IOS going from 12.2(53+) upto 15.2+ tracks without success.

In the later IOS's 15.0(2)S5 and upwards, even ip sla <number> disapeard.

Facing the issue with models WS-C2960S-48FPS-L and also WS-C2960S-48LPS-L. 

Thanks for anyone's help.

[nien452111]

I have the same problem  with WS-C2960S-48LPD-L