02-13-2014 07:11 PM - edited 03-07-2019 06:12 PM
Hi
We are getting below error on 7600 router
Router#copy startup-config running-config
Destination filename [running-config]?
%% Non-volatile configuration memory invalid or not present
What could be the possible issue
Br.Subhojit
02-13-2014 07:22 PM
Your title says that you're trying to save, but from your line you're trying to copy your startup config over the running config. Are you wanting to save the current configuration? If so, use "write mem".
HTH,
John
*** Please rate all useful posts ***
01-27-2022 06:48 AM
Worked for me just fine, thanks!
02-13-2014 07:45 PM
It looks to me that you don't have anything in your startup-config yet. Beware that the command you have there will merge the startup file (if it exists) into the current running config. It does not simply replace it.
Kevin Dorrell
Luxembourg
Sent from Cisco Technical Support Android App
02-13-2014 07:54 PM
Hi
Can you show us the output of
show file system
dir nvram
Do you get the startup config when you do a show start
And by the way why are you copying the startup config into the running config?
Thanks
Ankur
"Please rate the post if found useful"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide