cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
370
Views
0
Helpful
4
Replies

Error with switch 2960

Hi all , 

This error is appeared on switch 2960 i need to know what this error ?

 

%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/5: Power given, but Power Controller does not report Power Good

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

is this only port having issue ?

what version of code running also post show version and show power inline

also check below thread :

https://community.cisco.com/t5/switching/controller-port-error/td-p/2876390

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Admin-4#show cable-diagnostics tdr int gigabitEthernet 1/0/1

TDR test last run on: August 31 15:57:14

 

Interface Speed Local pair Pair length        Remote pair Pair status

--------- ----- ---------- ------------------ ----------- --------------------

Gi1/0/1   auto  Pair A     33   +/- 1  meters N/A         Short

                Pair B     33   +/- 1  meters N/A         Short

                Pair C     34   +/- 1  meters N/A         Short/Crosstalk

                Pair D     34   +/- 1  meters N/A         Short/Crosstalk

Faulty cable at the far end.

Dear , 

Kindly be informed that this issue is related to some ports not all ports and  the phone is directly connected to the switch

 

 

Admin-4 uptime is 15 weeks, 5 days, 18 hours, 24 minutes

System returned to ROM by power-on

System restarted at 21:38:29 EEST Fri May 12 2023

System image file is "flash:c2960s-universalk9-mz.150-1.SE.bin"

 

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

 

cisco WS-C2960S-24PD-L (PowerPC) processor (revision B0) with 131072K bytes of memory.

Processor board ID FOC1438Y0YA

Last reset from power-on

2 Virtual Ethernet interfaces

1 FastEthernet interface

26 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

The password-xxx

 

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : 6C:50:4D:6C:07:80

Motherboard assembly number     : 73-12427-07

Power supply part number        : 341-0393-02

Motherboard serial number       : FOC14374WAX

Power supply serial number      : DCA1424U1WS

Model revision number           : B0

Motherboard revision number     : A0

Model number                    : WS-C2960S-24PD-L

Daughterboard assembly number   : 73-11933-04

Daughterboard serial number     : FOC1438150R

System serial number            : FOC1438Y0YA

Top Assembly Part Number        : 800-32456-02

Top Assembly Revision Number    : A0

Version ID                      : V02

CLEI Code Number                : COMFF10BRB

Daughterboard revision number   : A0

Hardware Board Revision Number  : 0x01

 

 

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 28    WS-C2960S-24PD-L   15.0(1)SE             C2960S-UNIVERSALK9-M

 

 

Configuration register is 0xF

 

Admin-4#show

Admin-4#show powe

Admin-4#show power in

Admin-4#show power inline

 

Module   Available     Used     Remaining

          (Watts)     (Watts)    (Watts)

------   ---------   --------   ---------

1           370.0       90.5       279.5

Interface Admin  Oper       Power   Device              Class Max

                            (Watts)

--------- ------ ---------- ------- ------------------- ----- ----

Gi1/0/1   auto   faulty     0.0     n/a                 n/a   30.0

Gi1/0/2   auto   on         6.3     IP Phone 7942       2     30.0

Gi1/0/3   auto   on         6.3     IP Phone 7942       2     30.0

Gi1/0/4   auto   on         6.3     IP Phone 7942       2     30.0

Gi1/0/5   auto   off        0.0     n/a                 n/a   30.0

Gi1/0/6   auto   on         6.3     IP Phone 7942       2     30.0

Gi1/0/7   auto   on         5.0     IP Phone 7911       2     30.0

Gi1/0/8   auto   off        0.0     n/a                 n/a   30.0

Gi1/0/9   auto   off        0.0     n/a                 n/a   30.0

Gi1/0/10  auto   on         3.3     IP Phone 7821       1     30.0

Gi1/0/11  auto   on         12.0    IP Phone 7965       3     30.0

Gi1/0/12  auto   on         5.0     IP Phone 7911       2     30.0

Gi1/0/13  auto   on         5.0     IP Phone 7911       2     30.0

Gi1/0/14  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/15  auto   on         5.0     IP Phone 7911       2     30.0

Gi1/0/16  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/17  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/18  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/19  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/20  static faulty     0.0     n/a                 n/a   30.0

Gi1/0/21  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/22  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/23  auto   off        0.0     n/a                 n/a   30.0

Gi1/0/24  auto   off        0.0     n/a                 n/a   30.0

Admin-4#

Review Cisco Networking for a $25 gift card