10-18-2009 06:00 PM - edited 03-06-2019 08:11 AM
Hi,
I have a Novell server. It is connected to the interface g1/2 on 6506. According to LMS information (HUM application) int g1/2 has 2.77 Interface IN Errors (pkts/sec).
Below the statistics of this interface for 2 weeks:
15043278 packets input, 14151149930 bytes, 0 no buffer
Received 799 broadcasts (768 multicasts)
1152988 runts, 0 giants, 0 throttles
1153048 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
11763502 packets output, 2546442805 bytes, 0 underruns
0 output errors, 592572 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
How to check why has 1153048 errors appeared and what is the reason of it ?
P.S. Novell server work on IP protocol.
Solved! Go to Solution.
10-18-2009 09:08 PM
we can see there are 592572 collisions.
so the problem seems to be related to duplex mode..
may be the server is working in half duplex. you can check it from sho interf g1/2.
can you manually configure your NIC to work in full duplex and force it also in the switch port?
10-18-2009 09:08 PM
we can see there are 592572 collisions.
so the problem seems to be related to duplex mode..
may be the server is working in half duplex. you can check it from sho interf g1/2.
can you manually configure your NIC to work in full duplex and force it also in the switch port?
10-18-2009 11:02 PM
Indeed. The Novell's administrator changed the duplex of NIC to full. Then I set speed 100 and duplex full on the interface. There is only 1 error for 30 minutes and there are no collisions.
Thank you.
10-18-2009 11:47 PM
not at all.
i am happy problem is resolved.
and thanks for using rating
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: