About vyacheslav.k

vyacheslav.k · 11-22-2009

There is a LMS 3.0.1.Every day size of all log files only are increased.I have a 12G particion for log files but it's full every 2 weeks.In this case I have to stop LMS, delete all log files and start LMS manually every two weeks.Also, there is follo...

vyacheslav.k · 11-01-2009

Hi,there is a following structure: PSTN <-E1 PRI-> 5350 <-IP-> SoftSwitchThe problem is the calls from IP tel to PSTN go out, but connections are not established. The same situation with calls from PSTN to IP.IP tel (PSTN numbet) is 577011 PSTN (city...

vyacheslav.k · 10-27-2009

There are Publisher (CCM1) and Subscriber (CCM2) servers with CUCM6.There are some message at CW syslog collector:DRF sftp operation has failed. Reason:Unable to access SFTP server. App ID:Cisco DRF Master Cluster ID: Node ID:ccm1DRF Backup or Restor...

vyacheslav.k · 10-18-2009

Hi,I'd like to set up a notification service in LMS 3.0.1 to notify users about job results via e-mail.I have a SMTP server where a user has to authorise before he can sent an email.In LMS I have found CS -> Server -> Admin -> System Preferenceswhere...

vyacheslav.k · 10-18-2009

Hi,I have a Novell server. It is connected to the interface g1/2 on 6506. According to LMS information (HUM application) int g1/2 has 2.77 Interface IN Errors (pkts/sec).Below the statistics of this interface for 2 weeks: 15043278 packets input, ...

vyacheslav.k · 11-23-2009

Thank you, it works.Firstly, I've set up the files:NMSROOT/bin/perl NMSROOT/bin/logrot.pl -cthen I scheduled the NMSROOT/bin/perl NMSROOT/bin/logrot.pl in the cron to launch it every day.

vyacheslav.k · 11-04-2009

Yep, it has. The interesting thing is that when a call is unsuccessful I see signaling layer 2 brokes:(debug isdn q931, debug isdn q921)Nov 2 10:01:02.434: ISDN Se3/0:15 Q921: User TX -> RRp sapi=0 tei=0 nr=0Nov 2 10:01:02.438: ISDN Se3/0:15 Q921: Us...

vyacheslav.k · 11-04-2009

#sh controllers e1E1 3/0 is up. Applique type is Channelized E1 - balanced No alarms detected. alarm-trigger is not set Version info of slot 3: HW: 519, PLD Rev: 6 Framer Version: 0x9Manufacture Cookie Info: EEPROM Type 0x0001, EEPROM...

vyacheslav.k · 11-01-2009

Do you mean: show int serial 3:0/15 or some debug command? Sorry, I'm newbie in it that's why I don't know exactly how to check it. Maybe there is a document how to do it.

vyacheslav.k · 11-01-2009

I found out an interesting thing.I tried to call twice to PSTN number. First attempt was not successful, answer for SETUP did not come to cisco 5350. But, the first attempt was successful and connection between phones was established. Telco enginner...

Member Since	‎03-05-2009 07:23 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	62
Total Helpful Votes Received	30

User Statistics

User Activity

LMS3.0.1 Log files' size are not purged.

E1 PRI. Calls to PSTN and from PSTN are not connected.

CCM backup failed.

SMTP server with authorisation

Errors on the interface which is connected to Novell Server

Re: LMS3.0.1 Log files' size are not purged.

Re: E1 PRI. Calls to PSTN and from PSTN are not connected.

Re: E1 PRI. Calls to PSTN and from PSTN are not connected.

Re: E1 PRI. Calls to PSTN and from PSTN are not connected.

Re: E1 PRI. Calls to PSTN and from PSTN are not connected.