Etherchannel configuratio betwenn SWITCH VSS and ISR Router

[habouzyad]

Hello all,

I have in my data cneter the following :

1- Two Switchs 45XX configured AS VSS.  

2- We have a vlans configured and each vlans has its own SVI.

3- ISR ROUTER with 2 interface G.

We want connect this router to the both Swithcs using etherchannel (LACP). This Router will be connected to vlan ( exemple vlan2). This router must have an ip addresse on the VLAN2.

Would somoene help to did this configuration.

Thank you in advance

Best regards

CHAM

[Reza Sharifi]

Hi,

You can just connect the router with 2 interfaces (one to each VSS chassis) (no PO) and use 2 /30 subnets with routed ports on the 45xx VSS.

HTH