fasteddy50

[r-edwards]

        Is there a  command to globally invoke rw or  ro feature of SNMP on a 356024P switch?

[acampbell]

Hi,

Have a look at the Snmp section here :-

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_58_se/configuration/guide/swsnmp.html

Regards,
Alex.
Please rate useful posts.

[John Blakley]

You can enable snmp with:

snmp-server community RO

You can tie it down with an access-list as well if you were only interested in letting a single subnet get access to it:

access-list 62 permit 192.168.1.0 0.0.0.255

snmp-server community RO 62

The is really acting as the password, so I'd choose something that's not easy to guess...

You can replace RO with RW for read/write...

HTH,
John

*** Please rate all useful posts ***